Hello there,
after a few years of being out of the hobby I am starting to get interested again after seeing that a lot of budget printers now are having all the features that my old one were missing. Direct extruder, auto bed leveling, dual z axis, stuff like that. So which one of the budget printers around 300€ would you guys suggest one should get to get started again? Elegoo Neptune 4? Creality Ender 3 V3? Anycubic Kobra 2? Sovol S06? There are so many good looking options that I am interested in your experiences and opinions. Thanks!
I’m biased to say save and get a Prusa. It is what I did. It is not a printer project. The hardware specs are a misnomer. The continuous investment in the community is the real selling point. I spent more initially, but my Prusa is still worth nearly what I put into it even as a MK3S+ when the 4 is a thing. Everyone knows it will still work, and continue to do so, while parts will always be readily available. No one worries that it is some failed project.
Now if I tried to sell my little modified KP3S Kingroon, that thing is pretty much worthless now even though it works okay most of the time. I spent more on it at $200 than I did on the Prusa at just over 3× as much. I barely used the KP3S, wasted $100 on “upgrades” and it is now all loss. I got it after the Prusa knowing it is a project to screw around with. Spending more can often mean spending less when you consider long term value. That is just my personal opinion. I don’t regret buying the Prusa.
Same Bias here. Bought a Prusa Mini and got a working printer. In 3years I did nothing to the machine than cleaning and lubrication, and it still prints like day 1. Last year I got an update that enabled input shaping - on a machine that was out of warranty for close to a year already…
Ditto. My Prusa mini has been great, just an occasional clean. Got the mainly pre built one. And putting it in an enclosure really made it consistent too…
That’s one option and the one I was also thinking about. But it is triple the price for a few of the budget options.
If you value your time more than you like to tinker with your printer, then the cost makes sense.
If you like to do more maintenance and prefer to save the money up front, then the budget printers make sense.
Speaking as someone who wetn cheap and got an ender 3. I’ve spent 90% of my time with printer maintenance and calibration. Not printing…
You raise a very excellent point, for what I’ve spent toying and tinkering with my OG ender 3 pro, I very easily could have bought a nice Prusa/ Bamboo/ Voron printer.
That said, I can’t say I regret the thessian ender route either. I’ve learned so much about not just the printer itself and how it works on a fundamental level, but also how to model and design for the materials I’m working with and the capabilities of my machine I’m way more comfortable working with small electronics (wiring/ crimping/ soldering and am even flirting with PCB design) compared to when I first got into the hobby. I tend to be more of a hands on learner, so I enjoy the project printer (to an extent) and the learning experience that comes with it.
It very much depends on what OP is looking to get out of/ do with the printer, I 100% agree if it’s more of a "I just want it to work ", a Prusa or other mid-range printer* is probably the better play than something in the budget range.
* Depending on how OP feels about Bamboo, the A1 may be a good option on that front as well (once the teething problems get worked out)
I’ve got a Elegoo Neptune 3 Pro and found it really easy to setup and get good results printing without having to spend a lot of time fiddling - I guess it depends on your definition of “budget”, cos although it’s cheaper that the equivalent Prusa, there are definitely cheaper options around
As mentioned around the 300€ mark somewhere. So Neptune 4 Pro may be an option.
I’m happy with my Ender 3 Pro. I paid $200 but you can get it cheaper. I think there is a coupon sometimes for $100 at Micro Center. It’s common enough that replacement parts and upgrades (both printed and purchased) are readily available. Runs open source Marlin firmware and the design itself is also open source. Print quality is good for the price. For the price I’m OK with it not having direct extruder or dual Z axis, and adding auto bed leveling is easy enough with a BLTouch or CRTouch.
If you told me you could buy a passable 3D printer for $200 when I started building my printers 15 years ago, I’d have laughed in your face.
Same. I put together a knock off Prusa i3 kit in 2014 that cost me like $600 and most of the parts were themselves 3D printed. Not a bad thing but they were really rough prints. It printed OK for the time but was an endless source of annoyance. In comparison, the Ender 3 Pro just basically worked out of the box with minor bed leveling tweaks and everything else has just been minor quality of life improvements. It’s great.
I have a Elegoo and I really love it. Going 2 years and no problems, didn’t even change the fep yet
The Bamboo A1 mini is seriously good, but keep in mind that it’s closed source, so no modifying. It’s also very quiet.
I got a Sovol SV06 Plus and during the time I left it stock, it was excellent out of the box. I have started tinkering /upgrading and it is even better now (when it decides we are on speaking terms, lol).
